The ALLIGATA® Frequently Asked Questions Page

More questions and answers will be added over time, but please do not hesitate to ring us with any questions on 01268 768 768

b>How do i work out how many square metres an area is?

Its easy, simply times the width x depth of the area, i.e if you have a floor 10 metres x 12 metres, then the square metre of the floor would be 120 sqm. For your info our correx equivalent board has 3 sqm per sheet.

Do you supply Correx Protection Board?

We supply an equivalent product at the moment, we use the word correx to describe our product and make a comparison to our own brand. We may in the near future be stocking the correx brand of Corrugated Plastic Board but at the moment we do not sell the branded correx product

Can you custom make your version of Correx?

We do not supply the correx brand at the moment, however we can supply an alternative brand of corrugated plastic sheeting to any size and width and colour, plus we can print in one colour your own company logo etc

What protection material gives the ultimate protection?

Our corrugated plastic board gives the best protection, it is a twin wall plastic board with a fluted centre and is available in fire retardant spec to LPS 1207 upon request

What is MEGASHIELD?

Megashield is a unique product very similar to a product called megafilm. Megashield is one of our very best protection films as it has every quality needed including being fully fire retardant to LPS 1207, antislip, plus has a textured surface which allows air to breath under the film. Megashield is manufactured by us and at just £99.95 it is our best value floor protection material

How long can i use the self adhesive protection film for?

It depends on the scenario of useage so can vary from 2 weeks to 6 months. We recommend replacing our adhesive protection films after a 4 week period, the adhesive properties can fail after this time

Will the films definately peel off without leaving a glue residue?

The simple answer is no, all our protection films are designed for their individual applications and are normally fine, however their are factors out of our control which can cause the adhesive to fail. To be 100% sure of the suitability you would need to thoroughly test the product first as we cannot take responsibility. Most customers do not test before use though and 99% of our customers have no problems at all. The adhesive on our films is a very high quality water based acrylic adhesive system, in the unlikely event adhesive is left behind, its not a nightmare and is removed with hot soapy water, some of our competitors use a different type of adhesive which is a major problem to remove

We also ask all customers to double check that they have received the correct product, read the label to make sure you have ordered or received the right product before use as you may have ordered the wrong film or we may have packed it incorrectly, this is very rare though! Our films are colour coded as well so check that you have received the right colour before use

So, the films will leave glue?

All our films should be fine, we just cannot give you a 100% guarantee due to the large qty of surfaces and the individual conditions of the location etc

Are you fire retardant products certified?

Yes, unlike many manufacturers our products which are fire retardant conform the the industry standard LPS 1207 fire rating, many suppliers cannot say this as it costs more to manufacturer certified materials

If you have any questions which are not listed here please do not hesitate to give us a call on 01268 768 768



---------------------------------------------------------------------

---